Surveying with the Motion CL900

Tablet PCs come and tablet PCs go but the problem of the field PC remains the same. What we need is a reliable, daylight readable and portable device that will run CAD all day long so that we can see what we are doing as we do it. Not much to ask, and as the tablet wars hot up things should be getting better for the practitioner.My workhorse is the Motion Le1600 which will run most of what I need, will power up all day long on 3 batteries and has a just about daylight readable screen. We have been friends for years. We get on. There is nothing wrong with it, its a great teaching tool, but it’s too long in the tooth to hold up AutoCAD 2012 or Windows 7 so well…and it’s starting to feel heavy compared to some of the newer kit that’s begining to appear. Its logical replacement is the Motion J3500 but, being of reduced means,  I have decided to look at what can be done at the budget ‘netbook’ end of the market and this is where I met the remarkable CL900.

Suddenly, after using these things for years, there is a rash of apparently cheap Android/ Ios/HP OS tablets available on any high street (well retail park anyway) for well less than a grand. Having tried to do something useful with the beguiling iPad I feel I have learnt the ‘if it isn’t Windows…. it isn’t Windows‘ (or to put it another way if you can’t run proper CAD on it it’s an expensive door stop) lesson the hard way. A quick look at what you can run on an Android unit and the lovely cheapness doesn’t look so good.So if I have to lug a tablet around the world (and believe me, I do) what do I expect it to do?

The essentials are CAD, Bluetooth, Serial Comms (USB or Dsub9) email and internet,  I also need to be able to write reports, read and write PDF, handle images to a degree (more on this later) and present PowerPoints. It may well be madness to expect the Intel Atom (even at 1.5Ghz with 2GB of ram?) platform to manage all this so let’s start with getting to grips with CAD on a netbook- can it work?

With only 1.5Ghz prosessing speed and a max of 2GB ram you would think any current release of CAD (they only get bigger and slower don’t they!) would be a non-starter on the CL900- but if all you neeed to do is build wireframes and line drawings current release BricsCAD v10/11 holds up well ( yes it’s a bit slow to start…nothing new there!) and so I’m all set to find out if it will do a good days work.

As you would expect with a light weight processor and solid state HD package power uptake is good and the battery warnings don’t begin to bleat until at least 8 hours runtime!

3 stations and 1137 points plotted into CAD and 49% battery left on its first field day is a very good result…I’m begining to like this!

The battery life for field survey is very good indeed. We did a full days worth and didn’t need to deploy the external battery pack: with a Powerbank MP3450  a comfortable 10 hours runtime should be easily achievable.

The outdoors screen view is ok, its not the best but its workable. CAD runs ok if you accept its going to be a bit laggy with regens, opening up and the obvious graphics grief with image files.

Sadly I have been forced to use a finger as input since the pen stopped working for no good reason some 2 months in. This is a big pain when doing CAD editing on the fly with site data…I will be in touch with Camtech on this.

Now the other stuff I want it to do….

I can’t expect this little chip to push photos around in Photoshop so I have installed Advanced JPEG Compressor to get the basics of crop and web-ready done.  It’s very efective and reasonably priced too.

Writing reports is just about doable in Word (the old hardware of keyboard & mouse wins really and the single USB port is a bit of a handicap here).

Camtech supplied the CL900 and are most helpful with technical support so far (which has involved testing removal of the Ntrig interface for me: a potentially risky manoeuvre in the 1st instance).

So if you want a field tabet that will run TheoLt all day long the Motion CL900 is a good bet, its not lightning fast but it does the job. It’s light, well made and is a good example of a ‘Windows ipad’ (aWipad?) -Steve Job’s legacy may yet be a wide acceptance of the tablet form-something I believe needs to be a bit more than a locked down content browser,  the CL900 isn’t quite an ipad for windows but its very close.

About billboyheritagesurvey

Heritage worker
Gallery | This entry was posted in Survey Practice and tagged , . Bookmark the permalink.

One Response to Surveying with the Motion CL900

  1. The pen issue was resolved by reseating the pen tip with a gentle push- Thanks to help from Camtech!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s